|
Перечень доступного оборудования
|
The CHB308 can be installed on the CHB308/CSB316/SLIB8 (CN2) connector of the MBU or EMBU, and provides 3 CO/PBX Loop Start CO Line interfaces that support Pulse/DTMF signaling. Each interface contains ring and loop current circuits, A/D and D/A conversions, and pulse signaling circuitry.
It also provides 8 Hybrid (8 DKTs or 8 SLT interfaces) ports, and can detect FSK signal for incoming Caller ID, DTMF signal for incoming caller ID, call progress tone.
It also provides three on-hook connection paths for CID/SMS.
CHB308. Modular Jack (MJ1-MJ2) Pin Assignment
CHB308 MJ1 – 1,2,3 (CO)
CONNECTOR
|
PIN NUMBER
|
NO
|
SIGNAL NAME
|
RJ11
|
|
1,2
|
N/A
|
3,4
|
CO-T, CO-R
|
5,6
|
N/A
|
CHB308 MJ2 – 1,2,3,4,5,6,7,8 (EXTENSION)
CONNECTOR
|
PIN NUMBER
|
NO
|
SIGNAL NAME
|
RJ11
|
|
1
|
N/A
|
2
|
DKT-T
|
3,4
|
SLT-T, SLT-R
|
5
|
DKT-R
|
6
|
N/A
|
Add-On Board CMU50PR (Call Metering-50 Hz & Polarity Reversal Detection unit/NTB415)
The CMU50PR provides 3 channels Call Metering detection for 50Hz and provides 3 channels of Polarity Reversal Detection for call metering.
It can be installed on the MBU (NTB411) , EMBU (NTB412) , CHB308 (NTB417) , CSB316 (NTB418) .
Add-On Board CMU12PR (Call Metering-12KHz or 16KHz & Polarity Reversal Detection unit/NTB414)
The CMU50PR provides 3 channels Call Metering detection for 12 KHz or 16KHz and provides 3 channels of Polarity Reversal Detection for call metering. It can be installed on the MBU (NTB411) , EMBU (NTB412) , CHB308 (NTB417) , CSB316 (NTB418) .
|
|
|