|
|
Full description of Summit X670V-48x
General Specifications
Performance
- 1280 Gbps switch bandwidth, 952 Mpps forwarding rate
(Summit X670V-48x with VIM4-40G4X)
- 9216 Byte maximum packet size (Jumbo Frame)
- Less than 1 micro second latency (64-byte packet)
- 128 load sharing trunks, up to 8 members per trunk
- 4,094 VLANs (Port, Protocol, IEEE 802.1Q)
- 2,048 ingress and 1,024 egress ACL rules per switch
Forwarding Tables
- Layer 2/MAC Addresses: 128K
- IPv4 Host Addresses: 6K
- IPv4 LPM Entries: 16K
- IPv6 Host Addresses: 3K
- IPv6 LPM Entries: 8K
CPU, Memory
- 64-bit MIPS Processor, 1GHz clock
- 1GB ECC SDRAM
- 1GB Compact Flash
QoS, Rate Limiting
- 2,048 ingress bandwidth meters
- Ingress and egress bandwidth policing/rate limiting per flow/ACL
- 8 очередей QoS/порт
- Egress bandwidth rate shaping per egress queue and per port
- Rate Limiting Granularity: 8 Kbps – 1Mbps
LED Indicators
- Per port status LED including power status
- System Status LEDs: management, fan and power
- Motion Detection LED
External Ports с VIM4-40G4X
- 48 port 10GBASE-X SFP+ (1G/10G dual speed)
- 4 port 40GBASE-X QSFP+ (10G/40G dual speed)
- One RJ-45 RS-232c Serial port (control port)
- One 10/100/1000BASE-T out-of-band management port
Power Supply Support
- Summit 450W AC PSU
- Summit 450W DC PSU
Physical Specifications
Summit X670
- Height: 4.4 cm
- Width: 44.1 cm
- Depth: 48.9 cm
- Weight: 7.3 kg (Summit X670V-48x: w/o PSU, VIM4-40G4X)
VIM4-40G4X
- Height: 4.1 cm
- Width: 10.3 cm
- Depth: 16.6 cm
- Weight: 0.45 kg
Summit X670 Fan Module
- Height: 4.2 cm
- Width: 4.2 cm
- Depth: 10.1 cm
- Weight: 0.162 kg
Operating Specifications
- Operating Temperature Range: 0° C to 45° C (32° F to 113° F)
- Operating Humidity: 10% to 95% relative humidity, non-condensing
- Operating Altitude: 0-3,000 meters (9,850 feet)
- Operational Shock (Half Sine): 30 m/s2 (3 g), 11ms, 60 Shocks
- Operational Random Vibration: 3-500 MHz @ 1.5g rms
Storage & Transportation Conditions (Packaged)
- Transportation Temperature: -40° C to 70° C (-40° F to 158° F)
- Storage and Transportation Humidity: 10% to 95% RH, non-condensing
- Packaged Shock (Half Sine): 180 m/s2 (18 g), 6ms, 600 shocks
- Packaged Sine Vibration: 5-62 Hz @ Velocity 5mm/s, 62-500 Hz @ 0.2G
- Packaged Random Vibration: 5-20 Hz @ 1.0 ASD w/-3dB/oct.
from 20-200 Hz
- 14 drops min on sides & corners @ 42” (<15 kg box)
Acoustic Noise
Summit X670V-48x (FB): 56.6 dB(A) – 68.8dB(A)
Power Specifications
Measured power consumption with direct attach passive copper cables.
| PSU Type | 100% Traffic | 30% Traffic |
| Summit X670V-48x | AC | 170 W | 162 W |
| DC | 159 W | 150 W |
| Summit X670V-48x with VIM4-40G4X | AC | 199 W | 190 W |
| DC | 190 W | 181 W |
Summit X670V-48x
[AC PSU]
- Nominal Input Ratings: 100 – 240V, 50/60Hz, 3.75A
- Input Current: 3.0A @ 100V~ (lowline) 1.2A @ 240V~ (highline)
- Power Consumption: 300W (1,024 BTU/h)
[DC PSU]
- Nominal Input Ratings: 48 – 60V, 7.5A
- Input Current: 5.75A @ 48V~ (lowline) 4.6A @ 60V~ (highline)
- Heat Dissipation: 280W (956 BTH/h)
- Power Consumption: 280W (956 BTH/h)
Summit X670V-48x with VIM4-40G4X
[AC PSU]
- Nominal Input Ratings: 100 – 240V~, 50/60Hz, 3.75A
- Input Current: 3.4A @ 100V~ (lowline) 1.4A @ 240V~ (highline)
- Heat Dissipation: 340W (1161 BTU/h)
- Power Consumption: 340W (1161 BTU/h)
[DC PSU]
- Nominal Input Ratings: 48 – 60V, 7.5A
- Input Current: 6.85A @ 48V~ (lowline) 5.45A @ 60V~ (highline)
- Heat Dissipation: 330W (1126 BTH/h)
- Power Consumption: 330W (1126 BTH/h)
|
|
|
